Standards for Defining Asbestos Wastes to be UpdatedToxic Substance Management
「Standards for Defining Asbestos Wastes to be UpdatedToxic Substance Management」於資料集「MajorEnvironmentalPolicies」由單位「行政院環境保護署」的陳小姐所提供，聯繫電話是(02)23117722#2753,(02)23117722#2756，最近更新時間為：2023-07-30 01:03:45。 欄位編號的內容是395 ， 欄位標題的內容是Standards for Defining Asbestos Wastes to be Updated ， 欄位摘要的內容是At present all asbestos containing wastes are designated as hazardous industrial wastes. However the EPA has decided to update standards and in the future wastes from asbestos containing electric and thermal insulation or asbestos sprayed buildings will only be defined as hazardous where it is non-solidified asbestos and asbestos content is 1% or above.
On July 16 the EPA called together experts, scholars, local environmental protection units (EPUs) and industry members to discuss regulations concerning asbestos containing industrial waste. At the conference an initial consensus was reached to update current definition standards in consideration of U.S. and Canadian asbestos control laws.
In the regulations currently set forth in the Standards for Defining Hazardous Industrial Waste, asbestos and its waste products refers to asbestos wastes produced by industrial organizations. Because the regulation is overly simple, there is no indication as to whether all asbestos containing products should be treated as hazardous wastes after their disposal.
According to the Standards for Industrial Waste Storage, Collection and Treatment Methods and Facilities, asbestos containing wastes should first undergo wet treatment, be stored in double layered plastic bags with a thickness above 75x10-3cm and then placed in a hard container. Treatment through solidification can also be used provided that airborne dispersion is prevented.
Industry members indicated that treating all asbestos containing wastes as hazardous, whether or not they will be released into the environment, is too strict and difficult to implement.
They also pointed out that according to a 1996 report from the WHO, ILO, and UNEP, there is only danger of inhalation of asbestos fibers at the raw-material stage. Because most asbestos products have already been solidified they are safe to general consumers. For this reason asbestos wastes should be classified as general or hazardous wastes based on whether or not they have already been solidified or are in states where they are friable or will disperse into the air.
This May, the Friction Materials Association asked the EPA to amend relevant regulations in reference to laws from the U.S., Canada, Europe, Japan and other countries. They requested the EPA use a chart listing asbestos containing hazardous industrial wastes and revise clauses in the standards for defining industrial hazardous wastes to read, “asbestos electrical and thermal insulating materials and wastes from asbestos sprayed buildings shall be considered hazardous industrial wastes.”
As far as treatment methods for asbestos containing wastes, general regulations mandate that the pressure resistance of asbestos containing products must be above 10kg for it to be considered solidified. In reality though the pressure resistance of most products is a couple of hundred kilograms and will not result in harm to the human body after fracture. Thus they should not need to be further stored in plastic bags and placed in solid containers. EPA officials noted that they would consider industry members’ opinions.
An official noted that U.S. and Canadian laws governing asbestos would be used as references to amend current standards. Furthermore, besides adopting the suggestions of the Friction Materials Association, the EPA will only classify waste as hazardous if the asbestos content is above 1% and easily broken into powder by hand. If, however, the waste is proven not to disperse into the air, it will be classified as general waste regardless of whether asbestos content is above 1% or not. The EPA’s only fear is that local EPUs will have difficulty in identifying and executing the new regulations. The EPA plans to use a chart format to display relevant criteria to facilitate industry compliance and to help EPUs in enforcement.
During the July 16 meeting the EPA requested industry members provide information on asbestos contents, pressure resistance, and relevant preventative measures for their products for the EPA to use as a reference for the amendments. An EPA official stated that the conclusions reached at the conference will be circulated to relevant agencies and if there are not too many dissenting opinions they will be announced and brought into force in around one and a half month’s time. ， 欄位全文的內容是At present all asbestos containing wastes are designated as hazardous industrial wastes. However the EPA has decided to update standards and in the future wastes from asbestos containing electric and thermal insulation or asbestos sprayed buildings will only be defined as hazardous where it is non-solidified asbestos and asbestos content is 1% or above.
On July 16 the EPA called together experts, scholars, local environmental protection units (EPUs) and industry members to discuss regulations concerning asbestos containing industrial waste. At the conference an initial consensus was reached to update current definition standards in consideration of U.S. and Canadian asbestos control laws.
In the regulations currently set forth in the Standards for Defining Hazardous Industrial Waste, asbestos and its waste products refers to asbestos wastes produced by industrial organizations. Because the regulation is overly simple, there is no indication as to whether all asbestos containing products should be treated as hazardous wastes after their disposal.
According to the Standards for Industrial Waste Storage, Collection and Treatment Methods and Facilities, asbestos containing wastes should first undergo wet treatment, be stored in double layered plastic bags with a thickness above 75x10-3cm and then placed in a hard container. Treatment through solidification can also be used provided that airborne dispersion is prevented.
Industry members indicated that treating all asbestos containing wastes as hazardous, whether or not they will be released into the environment, is too strict and difficult to implement.
They also pointed out that according to a 1996 report from the WHO, ILO, and UNEP, there is only danger of inhalation of asbestos fibers at the raw-material stage. Because most asbestos products have already been solidified they are safe to general consumers. For this reason asbestos wastes should be classified as general or hazardous wastes based on whether or not they have already been solidified or are in states where they are friable or will disperse into the air.
This May, the Friction Materials Association asked the EPA to amend relevant regulations in reference to laws from the U.S., Canada, Europe, Japan and other countries. They requested the EPA use a chart listing asbestos containing hazardous industrial wastes and revise clauses in the standards for defining industrial hazardous wastes to read, “asbestos electrical and thermal insulating materials and wastes from asbestos sprayed buildings shall be considered hazardous industrial wastes.”
As far as treatment methods for asbestos containing wastes, general regulations mandate that the pressure resistance of asbestos containing products must be above 10kg for it to be considered solidified. In reality though the pressure resistance of most products is a couple of hundred kilograms and will not result in harm to the human body after fracture. Thus they should not need to be further stored in plastic bags and placed in solid containers. EPA officials noted that they would consider industry members’ opinions.
An official noted that U.S. and Canadian laws governing asbestos would be used as references to amend current standards. Furthermore, besides adopting the suggestions of the Friction Materials Association, the EPA will only classify waste as hazardous if the asbestos content is above 1% and easily broken into powder by hand. If, however, the waste is proven not to disperse into the air, it will be classified as general waste regardless of whether asbestos content is above 1% or not. The EPA’s only fear is that local EPUs will have difficulty in identifying and executing the new regulations. The EPA plans to use a chart format to display relevant criteria to facilitate industry compliance and to help EPUs in enforcement.
During the July 16 meeting the EPA requested industry members provide information on asbestos contents, pressure resistance, and relevant preventative measures for their products for the EPA to use as a reference for the amendments. An EPA official stated that the conclusions reached at the conference will be circulated to relevant agencies and if there are not too many dissenting opinions they will be announced and brought into force in around one and a half month’s time. ， 欄位年度的內容是2000 ， 欄位月份的內容是3 ， 欄位卷的內容是3 ， 欄位期的內容是2 ， 欄位順序的內容是1 ， 欄位倒序的內容是2 ， 欄位分類的內容是Toxic Substance Management ， 欄位標題2的內容是Standards for Defining Asbestos Wastes to be Updated ， 欄位檔案位置的內容是V3/V3-02 。
編號
395
標題
Standards for Defining Asbestos Wastes to be Updated
摘要
At present all asbestos containing wastes are designated as hazardous industrial wastes. However the EPA has decided to update standards and in the future wastes from asbestos containing electric and thermal insulation or asbestos sprayed buildings will only be defined as hazardous where it is non-solidified asbestos and asbestos content is 1% or above. On July 16 the EPA called together experts, scholars, local environmental protection units (EPUs) and industry members to discuss regulations concerning asbestos containing industrial waste. At the conference an initial consensus was reached to update current definition standards in consideration of U.S. and Canadian asbestos control laws. In the regulations currently set forth in the Standards for Defining Hazardous Industrial Waste, asbestos and its waste products refers to asbestos wastes produced by industrial organizations. Because the regulation is overly simple, there is no indication as to whether all asbestos containing products should be treated as hazardous wastes after their disposal. According to the Standards for Industrial Waste Storage, Collection and Treatment Methods and Facilities, asbestos containing wastes should first undergo wet treatment, be stored in double layered plastic bags with a thickness above 75x10-3cm and then placed in a hard container. Treatment through solidification can also be used provided that airborne dispersion is prevented. Industry members indicated that treating all asbestos containing wastes as hazardous, whether or not they will be released into the environment, is too strict and difficult to implement. They also pointed out that according to a 1996 report from the WHO, ILO, and UNEP, there is only danger of inhalation of asbestos fibers at the raw-material stage. Because most asbestos products have already been solidified they are safe to general consumers. For this reason asbestos wastes should be classified as general or hazardous wastes based on whether or not they have already been solidified or are in states where they are friable or will disperse into the air. This May, the Friction Materials Association asked the EPA to amend relevant regulations in reference to laws from the U.S., Canada, Europe, Japan and other countries. They requested the EPA use a chart listing asbestos containing hazardous industrial wastes and revise clauses in the standards for defining industrial hazardous wastes to read, “asbestos electrical and thermal insulating materials and wastes from asbestos sprayed buildings shall be considered hazardous industrial wastes.” As far as treatment methods for asbestos containing wastes, general regulations mandate that the pressure resistance of asbestos containing products must be above 10kg for it to be considered solidified. In reality though the pressure resistance of most products is a couple of hundred kilograms and will not result in harm to the human body after fracture. Thus they should not need to be further stored in plastic bags and placed in solid containers. EPA officials noted that they would consider industry members’ opinions. An official noted that U.S. and Canadian laws governing asbestos would be used as references to amend current standards. Furthermore, besides adopting the suggestions of the Friction Materials Association, the EPA will only classify waste as hazardous if the asbestos content is above 1% and easily broken into powder by hand. If, however, the waste is proven not to disperse into the air, it will be classified as general waste regardless of whether asbestos content is above 1% or not. The EPA’s only fear is that local EPUs will have difficulty in identifying and executing the new regulations. The EPA plans to use a chart format to display relevant criteria to facilitate industry compliance and to help EPUs in enforcement. During the July 16 meeting the EPA requested industry members provide information on asbestos contents, pressure resistance, and relevant preventative measures for their products for the EPA to use as a reference for the amendments. An EPA official stated that the conclusions reached at the conference will be circulated to relevant agencies and if there are not too many dissenting opinions they will be announced and brought into force in around one and a half month’s time.
全文
At present all asbestos containing wastes are designated as hazardous industrial wastes. However the EPA has decided to update standards and in the future wastes from asbestos containing electric and thermal insulation or asbestos sprayed buildings will only be defined as hazardous where it is non-solidified asbestos and asbestos content is 1% or above. On July 16 the EPA called together experts, scholars, local environmental protection units (EPUs) and industry members to discuss regulations concerning asbestos containing industrial waste. At the conference an initial consensus was reached to update current definition standards in consideration of U.S. and Canadian asbestos control laws. In the regulations currently set forth in the Standards for Defining Hazardous Industrial Waste, asbestos and its waste products refers to asbestos wastes produced by industrial organizations. Because the regulation is overly simple, there is no indication as to whether all asbestos containing products should be treated as hazardous wastes after their disposal. According to the Standards for Industrial Waste Storage, Collection and Treatment Methods and Facilities, asbestos containing wastes should first undergo wet treatment, be stored in double layered plastic bags with a thickness above 75x10-3cm and then placed in a hard container. Treatment through solidification can also be used provided that airborne dispersion is prevented. Industry members indicated that treating all asbestos containing wastes as hazardous, whether or not they will be released into the environment, is too strict and difficult to implement. They also pointed out that according to a 1996 report from the WHO, ILO, and UNEP, there is only danger of inhalation of asbestos fibers at the raw-material stage. Because most asbestos products have already been solidified they are safe to general consumers. For this reason asbestos wastes should be classified as general or hazardous wastes based on whether or not they have already been solidified or are in states where they are friable or will disperse into the air. This May, the Friction Materials Association asked the EPA to amend relevant regulations in reference to laws from the U.S., Canada, Europe, Japan and other countries. They requested the EPA use a chart listing asbestos containing hazardous industrial wastes and revise clauses in the standards for defining industrial hazardous wastes to read, “asbestos electrical and thermal insulating materials and wastes from asbestos sprayed buildings shall be considered hazardous industrial wastes.” As far as treatment methods for asbestos containing wastes, general regulations mandate that the pressure resistance of asbestos containing products must be above 10kg for it to be considered solidified. In reality though the pressure resistance of most products is a couple of hundred kilograms and will not result in harm to the human body after fracture. Thus they should not need to be further stored in plastic bags and placed in solid containers. EPA officials noted that they would consider industry members’ opinions. An official noted that U.S. and Canadian laws governing asbestos would be used as references to amend current standards. Furthermore, besides adopting the suggestions of the Friction Materials Association, the EPA will only classify waste as hazardous if the asbestos content is above 1% and easily broken into powder by hand. If, however, the waste is proven not to disperse into the air, it will be classified as general waste regardless of whether asbestos content is above 1% or not. The EPA’s only fear is that local EPUs will have difficulty in identifying and executing the new regulations. The EPA plans to use a chart format to display relevant criteria to facilitate industry compliance and to help EPUs in enforcement. During the July 16 meeting the EPA requested industry members provide information on asbestos contents, pressure resistance, and relevant preventative measures for their products for the EPA to use as a reference for the amendments. An EPA official stated that the conclusions reached at the conference will be circulated to relevant agencies and if there are not too many dissenting opinions they will be announced and brought into force in around one and a half month’s time.
年度
2000
月份
3
卷
3
期
2
順序
1
倒序
2
分類
Toxic Substance Management
標題2
Standards for Defining Asbestos Wastes to be Updated
檔案位置
V3/V3-02
「Standards for Defining Asbestos Wastes to be UpdatedToxic Substance Management」所屬的資料集：「MajorEnvironmentalPolicies」的其他資料
編號：
4141
標題：
Preannouncement to Add Chlorpyrifos and Chlorpyrifos-methyl as Prohibited Ingredients for Environmen
摘要：
chemicals
Preannouncement to Add Chlorpyrifos and Chlorpyrifos-methyl as Prohibited Ingredients for
全文：
This amendment is made in response to the international trend of tightening regulations on Chlorpyri
編號：
192
標題：
EPA Middle Management Reshuffled
摘要：
The EPA recently reassigned its Division Directors to broaden their ability to analyze diverse envir
全文：
The EPA recently reassigned its Division Directors to broaden their ability to analyze diverse envir
編號：
76
標題：
Toxic Chemicals Control Act Substantially Amended
摘要：
Toxic Substance On November 19 the Toxic Chemicals Control Act was amended and promulgated by presi
全文：
Toxic Substance Management On November 19 the Toxic Chemicals Control Act was amended and promulgat
編號：
3433
標題：
EPA Co-convenes Global Environmental Education Partnership Executive Committee Meeting in UK
摘要：
Environmental Education
EPA Co-convenes Global Environmental Education Partnership Executive Committ
全文：
EPA Co-convenes Global Environmental Education Partnership Executive Committee Meeting in UK
In rece
編號：
4144
標題：
egulations for Food Waste Reuse in Livestock Farms Revised to Prevent Spread of African Swine Fever
摘要：
Environmental inspection
Regulations for Food Waste Reuse in Livestock Farms Revised to Prevent Spre
全文：
The EPA stated that to be in line with the Council of Agriculture’s policies for preventing the spre
編號：
528
標題：
Outstanding Environmental Protection Volunteers to be Awarded Medals of Recognition
摘要：
In order to encourage environmental volunteers to participate in environmental study and service act
全文：
In order to encourage environmental volunteers to participate in environmental study and service act
編號：
3890
標題：
Taichung City Subsidized for Dongda River Water
Environment Improvement
摘要：
Water
Taichung City Subsidized for Dongda River Water
Environment Improvement
The EPA is subsidizing
全文：
As part of the third phase of the Forward-looking
Infrastructure Development Program, the Fazi River
編號：
3477
標題：
Amendments to Waste Lighting Source Recycling Methods and Facility Standards Preannounced
摘要：
waste Amendments to Waste Lighting Source Recycling Methods and Facility Standards Preannounced
全文：
Amendments to Waste Lighting Source Recycling Methods and Facility Standards Preannounced
The Recycl
編號：
422
標題：
Heavy Metal Classifications for Agricultural Soils to be Applied to Industrial Lands
摘要：
Due to the frequency of incidents of industrial-use land pollution and illegal dumping in Taiwan the
全文：
Due to the frequency of incidents of industrial-use land pollution and illegal dumping in Taiwan the
編號：
96
標題：
EIA Air Pollution Technology Criteria to be Studied
摘要：
Environmental Impact Assessment According to Article 49 of the recently announced Work Procedures f
全文：
Environmental Impact Assessment According to Article 49 of the recently announced Work Procedures f
編號：
3897
標題：
Crackdown on Dumping of Waste Liquid Near Feitsui Reservoir
摘要：
Water Crackdown on Dumping of Waste Liquid Near Feitsui Reservoir
Feitsui Reservoir is the source of
全文：
In September 2019, the EPAs Northern Branch of the Bureau of Environmental Inspection received a rep
編號：
3409
標題：
EPA Responds to Grounded Ocean Liner Yun Hai
摘要：
Water
EPA Responds to Grounded Ocean Liner Yun Hai
全文：
EPA Responds to Grounded Ocean Liner Yun Hai
The Niuean ocean liner Yun Hai was grounded off the co
編號：
3684
標題：
2018 Green Vehicles Announced
摘要：
Air Quality
2018 Green Vehicles Announced
Vehicle exhaust accounts for approximately one-third of PM
全文：
2018 Green Vehicles Announced
Vehicle exhaust accounts for approximately one-third of PM2.5 emission
編號：
663
標題：
Taiwan Promotes Regional Cooperation Thru Environmental Training
摘要：
On November 6 the EPA hosted the "International Training Courses for Environmental Professionals". T
全文：
On November 6 the EPA hosted the "International Training Courses for Environmental Professionals". T
編號：
3550
標題：
Second Draft of Amendments to Regulations on Plastic Shopping Bags Preannounced
摘要：
Waste
Second Draft of Amendments to Regulations on Plastic Shopping Bags Preannounced
The EPA has pr
全文：
Second Draft of Amendments to Regulations on Plastic Shopping Bags Preannounced
The EPA has preannou
編號：
2043
標題：
Green Mark Jumpstarts Eco-friendly Consumption
摘要：
Feature Column
Green Mark Jumps
全文：
Feature Column
Green Mark Jumps
編號：
2080
標題：
Domestic and Foreign Experts Talk on Waste Management Treatment and Reuse Technology
摘要：
Waste Management From 22~23 November 2007 the EPA invited waste experts from the US and Taiwan for
全文：
Waste Management From 22~23 November 2007 the EPA invited waste experts from the US and Taiwan for
編號：
3364
標題：
97.4% of Controlled Enterprises File First Water Pollution Control Fees Declaration
摘要：
Water 97.4% of Controlled Enterprises File First Water Pollution Control Fees Declaration
The EPA b
全文：
97.4% of Controlled Enterprises File First Water Pollution Control Fees Declaration
The EPA began co
編號：
4224
標題：
Moving toward Net-Zero Emissions by 2050 as Green Mark Turns 30
摘要：
In 2022, Taiwan Green Mark entered the thirtieth year of its implementation. As Taiwan strove toward
全文：
Moving toward Net-Zero Emissions by 2050 as Green Mark Turns 30
In 2022, Taiwan Green Mark entered t
編號：
315
標題：
EPA Completes First Phase Investigation of Organic Compounds in Tamshui River Bed
摘要：
The EPA announced the results of its first year investigation and analysis of heavy metals and organ
全文：
The EPA announced the results of its first year investigation and analysis of heavy metals and organ
編號：
9
標題：
Launch of Fuel Improvement Plan Accelerated
摘要：
Air Quality The problem of air pollution due to car and motorcycle emissions is drawing increased at
全文：
Air Quality The problem of air pollution due to car and motorcycle emissions is drawing increased a
編號：
3428
標題：
Local Governments Promoting Low-carbon Sustainable Homeland Awarded
摘要：
General Policy
Local Governments Promoting Low-carbon Sustainable Homeland Awarded
全文：
Local Governments Promoting Low-carbon Sustainable Homeland Awarded
On 23 April 2016, the EPA awarde
編號：
3317
標題：
International Conference Held to Share Experiences on Climate Change Adaptation
摘要：
Climate Change International Conference Held to Share Experiences on Climate Change Adaptation
From
全文：
International Conference Held to Share Experiences on Climate Change Adaptation
From 29 to 30 of Jun
編號：
3891
標題：
Environmental Resource Surveying and Monitoring
摘要：
Environmental Monitoring
1. Environmental Resource Surveying and Monitoring
Environmental resource s
全文：
Environmental resource surveying is rudimentary for environmental protection. It helps environmental
編號：
3645
標題：
Taiwan and Korea Hold Soil and Groundwater
Remediation Forum
摘要：
International Cooperation
Taiwan and Korea Hold Soil and Groundwater
Remediation Forum
Delegations f
全文：
Taiwan and Korea Hold Soil and Groundwater
Remediation Forum
Delegations from Taiwan and South Korea
編號：
4165
標題：
Enhancing and Utilizing the Recycling Fund to Its Full Effect
摘要：
Enhancing and Utilizing the Recycling Fund to Its Full Effect
Taiwan’s Four-In-One recycling system
全文：
In recent years Taiwan has been highly praised in the international community for its systemized rec
編號：
3415
標題：
Amendments to Regulations for Remediation Fees Collection Preannounced
摘要：
Soil and Groundwater
Amendments to Regulations for Remediation Fees Collection Preannounced
全文：
Amendments to Regulations for Remediation Fees Collection Preannounced
The EPA recently reviewed the
編號：
4027
標題：
Major Accomplishments of Sustainable development, technological development, and international devel
摘要：
全文：
The National Council for Sustainable Development (NCSD) convened three working meetings at the Execu
編號：
23
標題：
VOCs from PU Synthetic Leather Industry to Be Controlled
摘要：
Air Quality Taiwan is the world's leading polyurethane (PU) synthetic leather producer controlling
全文：
Air Quality Taiwan is the world's leading polyurethane (PU) synthetic leather producer controlling
編號：
4159
標題：
Revisions Preannounced for Standards for Determining Scope of EIAs
摘要：
EIA
Revisions Preannounced for Standards for Determining Scope of EIAs
The EPA evaluated the current
全文：
Revisions have taken into consideration suggestions from various agencies, announcements and previou
行政院環境保護署 的其他資料集
鹽水溪污染整治小組及再生願景聯繫會報
不定期更新,48汪先生 | 02-23117722-2849 | 2022-01-15 01:12:51
行政院環境保護署資源回收業(站、點)資料
不定期更新,158范小姐 | 02-23117722#2622 | 2022-01-14 01:26:05
行政院環境保護署行政院環境保護署環境保護人員訓練所會計月報
每1月更新,64江先生 | 03-4020789 #583 | 2023-08-09 01:05:45
行政院環境保護署建檔公廁明細-基隆市
不定期更新更新,310曾小姐 | (02)2311-7722#2760,(02)2311-7722#2894 | 2022-01-15 01:14:53
行政院環境保護署建檔公廁明細-金門縣
不定期更新更新,147賴先生 | 04-2252-1718#53686 | 2023-07-27 01:02:07
行政院環境保護署
空氣品質小時值_苗栗縣_苗栗站
每1時更新,367陳先生 | 02-2311-7722#2386 | 2023-08-02 00:58:02
行政院環境保護署南投縣重要環保統計資料
每1月更新,309顏先生 | 02-23117722#2109 | 2023-08-07 01:00:08
行政院環境保護署焚化廠營運年報
每1年更新,141莊先生 | 04-22521718#53523 | 2023-08-07 01:02:34
行政院環境保護署水庫水質監測站位置圖
不定期更新更新,64陳先生 | 02-2311-7722#2386 | 2023-08-07 01:04:22
行政院環境保護署碳粉匣對應型號
每1月更新,151黃小姐 | 02-23117722#2932 | 2023-07-30 01:01:22
行政院環境保護署
環境教育人員(訓練)認證申請書
不定期更新更新,49盧小姐 | (03)4020789分機606 | 2023-08-09 01:05:27
行政院環境保護署全國工業區年度備查案件狀態統計表
不定期更新更新,120詹小姐 | 02-2383-2389#8204 | 2022-01-15 01:12:19
行政院環境保護署底泥申報單位數量
不定期更新更新,58張小姐 | 02-2383-2389 #8401 | 2023-07-27 01:03:37
行政院環境保護署空氣品質小時值_彰化縣_彰化站
每1時更新,397陳先生 | 02-2311-7722#2386 | 2023-08-02 00:57:56
行政院環境保護署縣市(臺中市)小時值-每小時
每1時更新,220陳先生 | 02-2311-7722#2386 | 2023-08-02 00:58:50
行政院環境保護署
環保專案摘要資料_噪音振動
不定期更新更新,123陳先生 | 02-2311-7722#2386 | 2023-07-30 01:02:05
行政院環境保護署全國場址目前改善與整治進度
不定期更新更新,74賴小姐 | 02-2383-2389#8102 | 2022-01-15 01:12:11
行政院環境保護署重點事業廢棄物-有害性集塵灰之產出及清理流向
每1月更新,236林先生 | 02-2311-7722#2671 | 2023-08-07 01:01:56
行政院環境保護署空氣品質小時值_高雄市_小港站
每1時更新,380陳先生 | 02-2311-7722#2386 | 2023-08-02 00:57:37
行政院環境保護署EPQSummary_WasteManagement
不定期更新更新,208郭先生 | 02-2311-7722 EXT.2399 | 2022-01-15 01:13:53
行政院環境保護署
環境教育(教學)人員(專長)認證申請書
不定期更新更新,55盧小姐 | (03)4020789分機606 | 2023-08-09 01:05:28
行政院環境保護署生物源網格空氣污染排放量(TWD97)
不定期更新更新,179柏小姐 | 02-23712121#6106 | 2022-01-14 01:05:47
行政院環境保護署環保標章產品審查通過及有效數資料(第一類)
每季更新更新,154孫小姐 | 02-23117722#2926 | 2022-01-14 01:17:21
行政院環境保護署環境教育終身學習護照註冊人數
每季更新更新,54李小姐 | 02-23117722#2724 | 2022-01-15 01:10:49
行政院環境保護署嘉義市水量水質自動監測連線傳輸監測紀錄值即時資料集
每小時更新更新,50許先生 | 02-2311-7722#2831 | 2022-01-18 01:24:34
行政院環境保護署
環評主管機關受理審查之環境影響說明書
每2月更新,140黃先生 | 02-23117722#2748 | 2023-08-06 01:04:32
行政院環境保護署環保專案摘要資料_環境資訊系統
不定期更新更新,113郭先生 | 02-2311-7722 EXT.2399 | 2022-01-15 01:13:42
行政院環境保護署環保專案摘要資料_國際性議題
不定期更新更新,83郭先生 | 02-2311-7722 EXT.2399 | 2022-01-15 01:13:45
行政院環境保護署紫外線即時監測資料
每1時更新,275陳先生 | 02-2311-7722#2386 | 2023-08-02 00:57:05
行政院環境保護署推薦機關(薦舉)環境教育人員認證申請書
不定期更新更新,44盧小姐 | (03)4020789分機606 | 2023-08-09 01:05:27
行政院環境保護署